Model | Flatpack2 380/3000 HE |
Part number | 241119.825 |
INPUT DATA |
Voltage (nominal) | 176 - 277 VAC |
Voltage (range) | 85 - 305 VAC |
Frequency | 45 - 66 Hz |
Current (maximum) @ nominal input, full load | 18.2 ARMS |
Power Factor | > 0.99 at 50% load or more |
Protection | Fuse in L & N Varistor Disconnect when VIN is out of range |
OUTPUT DATA |
Voltage (default) | 381 VDC |
Voltage (adjustable range) | 300 - 400 VDC |
# Pb cell supported | 156 - 168 1) |
Power (maximum) | 3000 W |
Power @ 85 VAC | 1200 W |
Current (maximum) @ nominal input, full load | 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC) |
Current sharing (10 - 100% load) | ±5% of maximum current from 10 to 100% load |
Static Voltage regulation (10 - 100% load) | ±0.5% |
Dynamic Voltage regulation | ±5.0% for 10-50% or 50-10% load variation, regulation time < 25 ms |
Hold up time | > 20 ms; output voltage > 300 VDC at 1500 W load |
Ripple | < 1000 mVP-P , 30 MHz bandwidth |
Protection | Overvoltage shutdown Hot plug-in - Inrush current limiting ORing diode Short circuit proof High temperature protection |
OTHER SPECIFICATIONS |
Efficiency @ 230 VAC input | > 96.2% |
Isolation | 3.0 kVAC – input to output, 1.5 kVAC – input to earth, 1.5 kVDC – output to earth, 3.0 kVAC – CAN to primary, 3.0 kVAC – CAN to secondary |
Alarms (Red LED) | Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure |
Warnings (Yellow LED) | Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage |
Normal (Green LED) | Input and output ok |
Acoustic noise, at nominal input and full load | < 40dBA @Tambient< 25°C / <58dBA @ Tambient> 40°C |
MTBF (Telcordia SR-332 Issue I method III (a)) | >400 000 (@ Tambient : 25 °C) |
Operating temperature | -40 to +75°C (-40 to +167°F), humidity 5 - 95% RH non-condensing Output power de-rates linear from 3000W @ 50°C (122°F) to 980W @ 75°C(167°F) |
Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
Dimensions[WxHxD] / Weight | 109 x 41.5 x 327 mm (4.25 x 1.69 x 13”) / < 1.95 kg (4.3 lbs) |
DESIGN STANDARDS |
Electrical safety | EN 60950-1:2006+A11:2009+A1:2010+A12:2011, IEC 60950-1:2005+A1:2009, UL 60950-1:2011, CSA C22.2 No. 60950-1-07 |
EMC | EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2011, -6-4:2007 + A1:2011, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013 |
Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) 2011/65/EU (RoHS) & 2008/98/EC (WEEE) |
1) for 156 cells minimum test voltage is 1.923 V/cell. For 168 cell maximum boost voltage is 2.38 V/cell |
